034 Motorsport ZTF-R01 18×8.5 Forged Wheel 5×112 45mm Grey 034-604-0001-an

034Motorsport ZTF Wheels are fully forged, designed with ultimate performance in mind. ZTF Wheels are forged with 10,000 tons of pressure to produce a wheel that is incredibly strong, providing all of the performance attributes needed in a track focused wheel while also being practical for the street. Close inspection reveals scalloping of the spokes, giving the wheel rigidity while also keeping weight to a minimum. This design was chosen for its motorsports heritage and track-worthy strength. Each wheel features traction improving-bead seat knurling, a thicker inner rim flange for durability and strength, and machined accents for good looks. ZTF wheels are designed specifically for each application to provide the best appearance, optimal tire selection, and proper fitment with most popular aftermarket big brake kits. In addition, all ZTF wheels are durability tested according to DOT/SAE and JWL/VIA standards to ensure safety. ZTF Wheels are sold with a lifetime structural warranty against defects.

Some of our wheel sizing may seem unconventional at first. For example, questions frequently arise regarding the 9.3 inch wide wheel. The answer is simple. The ZTF wheel line is unique compared to other wheels offered in the segment in that they are designed for precise, model-specific fitment to maximize tire size while ensuring adequate clearance to the fenders and suspension components. Since these wheels are fully customized by the 034Motorsport engineering team, the optimal width from a performance and fitment standpoint can be chosen. In some cases that still results in the conventional half-inch sizing scale. But for other cars where conventional half-inch increments are a compromise, non-standard widths can be designed, such as the 9.3 inch and 11.2 inch wide ZTF wheels. Rest assured that ZTF Forged Wheels for your specific vehicle will fit perfectly without any guessing games or modifications to fenders or suspension components.

ZTF Forged Wheel Features:

Gear Cut Knurled Bead Seat:

< li >All ZTF Wheels feature a gear cut knurled bead seat which improves the bind between the tire and the rim. This prevents tire creep/slippage and improves traction in high performance driving conditions.

Reinforced Inner Rim Flange:

< li >An example of how material is removed while key areas retain mass. In this case, we added forged mass to the inner rim to resist impact bending.

Max Fitment:

< li >These wheels are application specific. We take into account the proper performance wheel and tire size and the aesthetic of the car to make sure that these wheels not only perform well, but also look fantastic.

Brake Clearance Compatibility:

< li >Wheel designs have been tested with some of the world’s premier aftermarket big brake kit suppliers to ensure that these wheels clear potential racing upgrades. Wheels are designed to clear brakes from the design phase, while maintaining max concavity and good looks. Notice the raised rim barrel which allows for large diameter rotor and caliper combinations.

Rigid Spoke Tracer:

< li >ZTF Wheels feature structural improvements to basic designs such as the rigid spoke tracer. This improves the stiffness and durability of the wheel while keeping the weight of the wheel to a minimum. Improving stiffness is key because if the wheel can withstand deflection/deformation in high load situations, you can improve driving consistency, which in turn leads to better confidence on the track.

Weight Reduction:

< li >Painstaking care was taken in removing s much material as possible while keeping material in critical areas to ensure complete safety and reliability. All areas of the wheels are considered and tested with FEA Analysis software and tested in both laboratory and real world conditions.

Wheel Specifications:

< li >Size: 18″

< li >Width: 8.5″

< li >Weight: 18lbs

< li >Offset: ET45

< li >Bolt Pattern: 5×112

< li >Center Bore: 57.1 (no hub-centric rings required)

< li >Lug Seat: OE Ball Style

< li >Center Cap Retainer: Double O-Ring (will not fall out)

< li >Color: Grey (looks great on any color vehicle and hides brake dust)

Fitment: Front & Rear

< li >Audi A3 8P 2006-2016

< li >Audi A3 8V 2006-2013

< li >Audi A4 B5 1996-2004

< li >Audi A4 B6 2002-2005

< li >Audi A4 B7 2005-2008

< li >Audi Q3 8U 2012+

< li >Audi S3 8V | 8V.5 2015+

< li >Audi S4 B5 2000-2002

< li >Audi S4 B6 2003-2005

< li >Audi S4 B7 2005-2008

< li >Audi TT 8J 2008-2015

< li >Audi TTS 8J 2008-2015

< li >Audi / S3 / 8Y / 2.0 TFSI / 2022+

< li >Volkswagen Golf R / Mk8/ 2.0T Gen4 / 2021+

< li >Volkswagen GTI / Mk8/ 2.0T Gen4 / 2022+

< li >Volkswagen GLI MkVI 2011-2017

< li >Volkswagen Golf MkVI 2010-2014

< li >Volkswagen Golf MkVII 2015+

< li >Volkswagen Golf R MkVII 2015

< li >Volkswagen GTI MkVI 2010-2014

< li >Volkswagen GTI MkVII 2015+

< li >Volkswagen Passat B7 2012+

< li >Volkswagen Rabbit MkVI 2010-2014

< li >Volkswagen Rabbit MkVII 2015+

< li >Volkswagen Tiguan I 2009-2011

< li >Volkswagen Tiguan II 2012+

Show More Sizes

WARNING: Cancer and Reproductive Harm