034 Motorsport 350x22mm Red Floating Rear Brake Rotor Upgrade 034-301-2004-red

350mm 2-Piece Floating Rear Brake Rotor Upgrade for MQB VW & Audi is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory rear calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!

Weighing in at approximately 14lbs, each rotor reduces rotational weight by 1lb on each corner over the factory 15lb rotors and increases rotor diameter from 310mm to 350mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.

The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved vanes to forcefully flow cool air through the rotor to dissipate heat.

The face of the rotor utilizes J-Slot slots to clean the pad surface of contaminants and allows hot pad outgassing.

The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat.

Features:

< li >Lightweight Construction (14lb 350mm 034Motorsport Rotor vs. 15lb 310mm OE Rotor)

< li >Floating, 2-Piece Design

< li >Aerospace Grade Aluminum Hats with Type III Hard Anodizing**

< li >CM-250 Special Alloy Rotor Rings

< li >J-Slot Slotted Friction Face

< li >OEM Fitment & Functionality

< li >72 Curved Vanes Force Cooling Air through Brake Disc

< li >Floating Bobbins Mounting System

< li >Replaceable Rotor Rings

< li >Lower Long-term Maintenance Cost

Kit Inclusions:

< li >034Motorsport 2-Piece Floating Rear Rotor Pair

< li >Caliper carrier conversion brackets

Fitment:

< li >Audi A3 8V 1.8 TFSI 2015+

< li >Audi A3 8V 2.0 TFSI 2015+

< li >Audi RS3 8V 2.5 TFSI 2015-2017

< li >Audi RS3 8V.5 2.5 TFSI EVO 2017+

< li >Audi S3 8V 2.0 TFSI 2015+

< li >Audi TT 8S 2.0T Gen 3 2016+

< li >Audi TTS 8S 2.0T Gen 3 2016+

< li >Audi TTRS 8S 2.5 TFSI EVO 2018+

< li >Volkswagen Golf R MkVII 2.0 TSI 2015+

Notes:

< li >Does not fit Mk7/7.5 GTI, MK8 GTI, MK8 Golf R, 8Y Audi S3

< li >This kit will only fit A3’s with ventilated rear rotors, and WILL NOT fit cars originally equipped with solid rotors.

< li >Type III hard anodizing of aluminum is considered as a functional surface coating process. While we always aim for color consistency, color variations may exist from batch to batch due to the nature and variables in the anodizing process.

< li >The installation of your 034Motorsport 2-Piece Floating Rear Brake Rotor Upgrade Kit is a relatively simple process that will take approximately 2-3 hours to complete, dependent on the installer’s experience.

WARNING: Cancer and Reproductive Harm