MTS Technik Stance Coilover Kit Audi 80/90/Coupe B3 Quattro 1986-1996 MTSGWAU70-S

The Stance series is the perfect solution for those whose priority is wheel fitment. Thanks to increased stiffness compared to the Street series, it allows for precise adjustment of the vehicle height and minimal wheel-arch distance. Dedicated to users who value increased suspension stiffness and the ability to lower the vehicle further.

MTS Technik Coilover Suspension – the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter – thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Features:

< li >2 year warranty with no mileage limit to confirm high quality.

< li >Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

< li >The use of twin-tube technology guarantees stable shock absorber performance.

< li >Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

< li >Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

< li >Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

< li >Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

< li >Coilover springs made by Eibach, the world leader in the sport springs industry.

Specifications:

< li >Maximum Axle Load FA: -1100 kg

< li >Maximum Axle Load RA: -950 kg

< li >Lowering FA: 20 – 70 mm

< li >Lowering RA: 30 – 75 mm

< li >Camber / top mount FA: yes

< li >Camber / top mount RA: no

< li >Coilover Main Spring (Front): Spring rate (70 N/mm)

< li >Coilover Helper Spring (Front): Spring rate (20 N/mm)

< li >Coilover Main Spring (Rear): Spring rate (60 N/mm)

< li >Coilover Helper Spring (Rear): Spring rate (20 N/mm)

< li >TUV Certificate: no

Install Instructions:

< li >For Instructions CLICK HERE

< li >For Installation Manual CLICK HERE

Fitment:

< li >Audi 80 B3 Quattro 89Q (1.8 S Quattro / 1.8 E Quattro / 1.8 Quattro / 2.0 Quattro / 2.0 E Quattro / 2.0 E 16V Quattro) 1986-1991

< li >Audi 90 B3 Quattro 89Q (2.0 20V Quattro / 2.2 E Quattro / 2.3 E Quattro / 2.3 E 20V Quattro) 1987-1991

< li >Audi Coupe B3 Quattro 89Q (2.0 20V Quattro / 2.2 Quattro / 2.3 Quattro / 2.3 20V Quattro / 2.6 Quattro / 2.8 Quattro / S2 Quattro) 1988-1996

Notes:

< li >2 – Front and rear axle height adjustable (threaded shock absorber housing).

< li >15 – Only for vehicles with U-bracket attachment at the rear shock absorber.

< li >21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

< li >24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

< li >61 – Tylko dla modeli z napdem 4×4.

WARNING: Cancer and Reproductive Harm